Internet of things intelligent management system teaching all-in-one machine TL-5080

Parameter model	TL-5080
整机部分
Control method	APP控制（配备的Android、ios系统）、电容感应触摸按键面板、红外遥控、软中控
Anti-theft alarm	After the defense is activated, when the HDMI cable connected to the designated interface of the projector is disconnected, the all-in-one will send an alarm
Lightning protection function	Built-in lightning protection module, can withstand not less than 6KV surge impact
Input voltage	AC220V±10% 50HZ-60HZ
Size	1280 X 340 X 53mm (whole size), 1365 X 455 X 158mm (package size)
Interface Part
220V power supply	1 input, 2 output
HDMI	3 groups of input (1 group at the top, 1 group in the front, 1 group in the built-in), 2 groups of output (top)
AUDIO	3 groups of input and HDMI synchronous switching (2 groups external, 1 group built-in), 1 group output (top)
Audio amplifier output	2.0 audio output interface 1 group (top)
RS232	1 group (standard DP9 male socket)
MIC	1 group (front wired microphone with stepless volume adjustment)
USB	USB2.0 6 groups (top 2 groups, front 4 groups), USB3.0 2 groups (front, including 1 group optional)
Built-in five-port network switch	RJ-45: 5 groups (1 input at the top; 2 output at the top, 2 inside)
Central Control Part
Infrared learning/remote control	Infrared remote control function (any infrared remote control can control the function of this machine after learning)
Switch machine	System power on/off (touch panel one-key linkage all-in-one machine and projection power on/off), computer power on/off (touch panel can switch the computer independently), projector power on/off (touch panel can switch the projector independently)
One key mute	One-key mute on the touch panel, and has the ability to fade in volume
One-click black screen	Have
Treble and bass adjustment	Have
One-click arming	Have
System reset	One-key system restart on the touch panel (including computer and central control)
Computer restore	One button on the touch panel to restore the computer to the factory state
Booth	One-key booth (one-click on the touch panel to open the booth software), booth photography (one-click on the touch panel to take pictures of the booth)
Central control mode	When the local computer is not used, the external signal can be used independently without turning on the computer
Laptop intelligent linkage	When the laptop HDMI interface is connected to the front HDMI interface, the display device will automatically display the laptop signal
OPS computer (optional)
Motherboard	Industrial Control Motherboard
CPU	I5
RAM	4GB
Hard disk	128GBSolid state
Amplifier/speaker section
Rated power	30W×2
Signal-to-noise ratio	≥80dB
Showcase part
Imaging Device	1/3″cmos，500WPixel
Zoom factor	24 times digital zoom
White balance	Automatic
Resolution	2592x1944
Picture Processing	Zoom in/out, color/black and white, negative film, mirror image, 90°rotation, cut
Annotation function	Curve, straight line, rectangle, ellipse, text input, undo, redo, delete, line thickness, style, color
Camera function	One key to take pictures (the quality of the saved pictures is adjustable, 16 pictures can be previewed), support continuous shooting
Trick	PDF conversion, support for multi-language OCR function, one-click printing, simultaneous audio and video recording
Optional function
Multifunctional voice flying squirrel	2.4G wireless microphone, PPT page turning, flying squirrel, gesture recognition, laser pointer, all-in-one control
M1 card swipe switch machine	Optional
Micro lesson recording	Smart housekeeper synchronously records computer desktop audio and video and 2.4G microphone audio of the same brand

1. Remote service

The technician remotely confirms that the equipment is a company's quality problem, and the response time is divided into two categories:

A. Confirm that you need to replace the accessories. If you accept the after-sales service before 3 o’clock, the customer’s required replacement parts will be sent within the same day. If the after-sales service is accepted after 3 o’clock, the customer’s required accessories will be sent out on the next day. The actual situation shall prevail);

B. Confirm that it needs to be returned to the factory for repair. After the customer arranges to send it out, the after-sales service will give the test results within 2 working days, and arrange to send it out within 3 working days. , The delivery time depends on the customer

Payment processing time, after-sales receipt of the repair payment, arrange to send it out within 2 working days);

2. Exchange service

If there is a problem within 15 days after the customer receives the new equipment, it is technically confirmed that it is a quality problem. The company will bear the round-trip freight and replace the machine. If the replacement period exceeds 15 days, only repairs and not replacements will be paid, and the transportation freight will be paid half (see details) Warranty);

3. On-site service (for on-site conditions)

Collect the questions and report them to the superior and give the customer a reply within 24 hours, and arrive at the on-site after-sales service within one week (the above-mentioned terms must be satisfied)